---

Example : Schematic Capture (CMOS Inverter)

Step 3 : Placing supply voltage components

1. Picking up the supply voltage components involves the same steps as in adding transistors to the schematic.

• Choose Add and then Component on the menu banner if you somehow closed the Component Browser window.

• Click on the folder "Supply_Nets", so that you will access the components in this folder.
  

• We will put the components "vdd" and "gnd" in our schematic. You can pick up one of them simply by clicking on the corresponding one. Let's assume that we take "vdd" first, so, click on "vdd", move the mouse on the schematic window and place the component by clicking a location in that window. The individual steps of this procedure are described in the images below.
  

2. You can follow similar steps for placing the "gnd" component.

3. At this point, we are finished with selecting and placing the necessary components.

Press "ESCAPE" (ESC) key on the keyboard to close the Component Browser and Add Component windows.

a production of

Cadence is a trademark of Cadence Design Systems, Inc., 555 River Oaks Parkway, San Jose, CA 95134.
Please read this DISCLAIMER

Last Updated by Ilhan Hatirnaz on 10/30/1998